Which Plastic Sheet or Rod Material is right for me?

This not an easy question to answer. Several different factors come into play when choosing the right plastic for your application. Temperature, strength, exposure to the elements and even time spent at elevated temperatures are just a few factors to consider when choosing the right plastic for a particular project or job.Researching the best plastic sheet and rod materials

Picking the right plastic for your application is critical for its success and longevity and needed to insure that the material doesn’t fail in critical situations. From the onset it may take a bit of time to choose the right plastic material, but will ultimately pay off in the long run. Simply choosing the cheapest plastic sheet or rod may spell disaster for your project.

Many plastics are resistant to chemical attacks. Some plastics however are not. Two examples of plastic that have low resistance to chemicals are Acetal or Delrin (Dupont Brand Name) and Nylon. Acetal and Nylon are both a great machining plastics with excellent wear resistance and impact strength. However, when exposed to chlorine or alkaline they tend to become brittle which can cause failure and if used in such instances as plumbing, can lead to major problems such as flooding. Nylon does have good resistance to many chemicals but will degrade when exposed to acids especially sulfuric. A plastic that would work better for applications involving the use of chlorine or acids is UHMW. UHMW has some of the same properties as Acetal such as wear resistance, ease of machining and are both self lubricating. UHMW often is an alternative for Acetal and Nylon, especially when it comes to chemical attacks.Are you searching for the right plastic material for your project

Many plastic sheet and rod materials to choose from

Another plastic that can fail if used in the wrong application is Acrylic. Acrylic is a great plastic for displays and decorative purposes and is a natural replacement for window glass. However, it is brittle and has very low impact strength as opposed to Polycarbonate. Polycarbonate is a great plastic for impact strength, probably the best in the plastic family. It is 25 times stronger than Acrylic and this makes it ideal for bullet resistant glass and riot shields, while Acrylic would be useless for those critical jobs. However, Acrylic has better U.V. resistance than Polycarbonate Plastic Sheet which makes it better for use outdoors over longer periods of time because it is invisible to sunlight. Another plastic that cannot handle U.V. rays is Polypropylene. Polypropylene unlike Acetal has excellent chemical and moisture resistance. However, unlike Acrylic, it becomes brittle in sunlight and starts to craze or crack when exposed over a period of time while Acrylic would last many years longer. Even though Polypropylene is a very rigid and stiff material, with good impact and crack resistance, if exposed to the elements for a period of time, it will not retain its properties and a chemical chain reaction will cause the material to eventually fail. Polypropylene is great at handling chemicals and food applications which neither Acrylic nor Polycarbonate Sheet are well suited because for this application, because they don’t have good chemical resistance and the standard grades are not approved for handling food.

So many Plastic Sheet and Rod Choices

Because there are so many options, we invite you to do further research. One are would be the blog post ‘Pick The Proper Plastic Material‘, or even use the online tool ‘Gehr Plastic Selection Tool‘. There are over 60 standard plastic sheet materials that we stock, with many additional material that are available from our factories, contact us for help with your application.

These are just some examples of the differences between plastic resins and it is important to note that just because one plastic works for one application, it may not work for another. All factors must be considered and taken into account, maybe even some trial and error. This will insure that your project will go smoothly and will be able to last through many years of use, saving time, money and patience.

Contact us for more examples of materials and the differences between specific items. Also, we have a great tool to help you in choosing the proper plastic material for your application, check out our free Plastic Material Selector Guide. We would also welcome your email inquiries or call us at: 866-832-9315.
Google

 


About Plastic Sheet Material

Plastic Sheet, Sheets and Sheeting materials In Stock

Today’s topic is all about industrial plastic sheet materials in flat sheet or sheets. Also known as plate, slab, strip and bar.

Most plastic materials are processed into sheets or rods. Rods are round, sheet is flat, square or rectangular. These two basic shapes are both generally extruded, although sheet can also be compression molded. Almost all plastic raw materials are available in sheet, and in a huge range of sizes. Most materials are available from .063″ to over 4″ in thickness; and some as thick as 8″ (how to measure thickness accurately, use a 6-Inch Digital Caliper with Extra-Large LCD). Sheet sizes vary, but generally most plastics are produced in 48″ X 96″ sheets or larger, but once again this changes with types of materials and thickness desired. We can help with almost any plastic material.

Need Help Picking a Plastic Sheet Material?

Deciding on the proper material for an application is the first step. Start by reviewing our Plastic Materials Selection Guide to help narrow your search. Having the key properties and needs of your project in mind will help you with this step. Also looking at both the pro’s and con’s of a material will assist in this search. Materials with the greatest property range can be extremely expensive, selecting a material that meets your needs and your budget should be considered.

Step two is researching sizes and availability – this is where we can really help. With most of the major manufacturers as partners, we are able to source your parts from many factories. While the quality from most factories is excellent, the variable is standard and custom sheet sizes. We also stock a wide variety of materials in large Plastic Sheets In Stock, Acetal sheet, nylon sheetsheets. One of our many manufacturers is Westlake Plastics. They have been compression molding large sized sheets of many popular plastic resins; these sheets are available in 48″ X 120″ as a standard sheet size in most plastics. They produce these materials from .250″ – 3.0″ thick or thicker. Other manufacturers produce 24″ X 48″ or 48″ X 96″ sheets as standard. Please contact us for specifics on your material selection.

Most of our plastic resins are available as a sheet. This includes some of the most popular plastics, like: Polycarbonate Sheet, Acetal Sheet, PTFE Sheet, Ultem Sheet and dozens more. Sometimes, Plastic sheet is called: Plate, Strip, Bar, Slab, Block or Panel. Please think of these names as being synonyms with Plastic Sheet. Contact us with your special requirements.

In thicker gauges, plastics are frequently referred to as plate, slab or block. And strips or narrow pieces are called bar. A rose by any other name, call it what you will, the plastic starts as a flat sheet from the factory. We can cut them to size or shape. Blanking of sheets to useable sizes is our specialty. Narrow pieces used for long applications are normally called strip. Strip is common in wear type applications.

For a list of materials we have as standard stock materials, check our Plastic Sheets Page. These and many other plastic materials are available, and custom sizes, shapes and colors vary by base material. As a stocking distributor for dozens of major manufactures, we are the West Coasts leading plastic sheet supplier or distributor. If you are in need of some technical assistance go to our Plasticologist page for specific help.

Contact us for more information on plastic sheet materials. Email us or call 866-832-9315

Google+