Nylon Rod and Sheet (Polyamide) Grades available

The Nylon family of plastics are all very tough, strong, machine well, and have excellent wear properties. Nylon is a very popular plastic material, and is found in numerous applications. One of the largest usages is the production of household carpeting because of the excellent wear resistance. Nylon replaces materials such as UHMW, PET, Acetal – Delrin, and ABS. It will outwear most plastics and is self lubricating.

The wide variety of types and colors is one of the largest in the plastic industry.Nylon Rod Type 6/6 and Type 6, rods can be machined into gears

Nylon Type 6/6 Rod, Sheet and Plate

The extruded Nylon 6/6 (Nylon Rod and sheets) material (aka: Polyhexamethylene Adiptimide) is available as Natural (tan – straw), Black, Glass filled (medium tan) and a molybdenum disulphide filled which is very dark gray. The most common size range for the extruded Nylon 6/6 is .125″ – 4.0″ diameter rod, and .125″ – 4.0″ thick sheet. The thicker materials should be cast due to cost and stress issues. For addition details on the Nylon Rod and Sheet 6/6 – see the data sheet.

Nylon Type 6 Cast Polycaprolactam

The cast Nylon type 6 has almost limitless possibilities. Many colors are available in Cast Nylon, the natural color, black, blue, dark gray (normally molybdenum disulphide filled again), green and many more. Sometimes the color is determined by the additive (oil filled) or by industry. Because of its relative ease of manufacture, many companies prefer to get their Nylon in a special color to help ‘brand’ their parts.

Cast Type 6 Polyamide can be made in Nylon rod from about 1.25″ diameter to almost any size. Nylon sheet normally starts at about .75″ thickness, and once again, can be made to almost any thickness. In addition to standard rod and plate, other sizes and shapes can be cast from Nylon Type 6 – ie. discs, tubes, near net shapes, large profiles, etc. The only limitations are how much money you have, and the size of the truck to get it to you! We have had cast very large blocks (11″ X 11″ X 48″ solid), sheaves up to 66″ OD, large tubes 36″OD X 12″ ID X 14″ long, and many more massive Nylon Cast parts. Nylon Sheets, Nylon Rod and Massive Blocks, Huge Sheave, Near Net Shapes - Nylon - Polyamide

Nylon 6/12 -Low Moisture Absorption

The claim to fame for the Nylon Type 6/12 is the low moisture absorption of the material. It is more stable that the type 6 or 6/6, and with the lower water absorption, this resin can handle a wider range of environments. Our manufacturer can run this as an Extruded Nylon Rod item or as a Cast Nylon Rod item. This opens the door to a wide range of sizes and shapes. This material exhibits most of the same properties of the Nylon 6/6 and Cast Type 6, with some slight improvements in key properties.

Filled Grades of Nylon

Because of the processing of Cast Nylon, many additives can be mixed into the material. The most common are: glass filled, oil filled, Kevlar fiber filled (Hydlar Z) and the molybdenum disulphide (M0S2). In addition, other fills and colorants (pigments) can be added to assist in manufacture or processing.

Common specifications for Nylon are: L-P-410, ASTM D-4066, L-P-395C, Mil-M-20693B Comp A, Ty I, IA, II and III, Mil-M-20693B Comp B, Ty 4, Mil-P-17091B Type 1, and Mil-P-46060, PA0613, ASTM D-5989 S-PA0511, and more.

Before buying your next big chunk of Nylon, contact us for information on the benefits of a filled  or near netshape Cast Nylon part.

Contact us with your specifications, we look forward to assisting you.

Email us with questions or comments, or call us at 866-832-9315
Google+
Share


About Plastic Sheet Material

Plastic Sheet, Sheets and Sheeting materials In Stock

Today’s topic is all about industrial plastic sheet materials in flat sheet or sheets. Also known as plate, slab, strip and bar.

Most plastic materials are processed into sheets or rods. Rods are round, sheet is flat, square or rectangular. These two basic shapes are both generally extruded, although sheet can also be compression molded. Almost all plastic raw materials are available in sheet, and in a huge range of sizes. Most materials are available from .063″ to over 4″ in thickness; and some as thick as 8″ (how to measure thickness accurately, use a 6-Inch Digital Caliper with Extra-Large LCD). Sheet sizes vary, but generally most plastics are produced in 48″ X 96″ sheets or larger, but once again this changes with types of materials and thickness desired. We can help with almost any plastic material.

Need Help Picking a Plastic Sheet Material?

Deciding on the proper material for an application is the first step. Start by reviewing our Plastic Materials Selection Guide to help narrow your search. Having the key properties and needs of your project in mind will help you with this step. Also looking at both the pro’s and con’s of a material will assist in this search. Materials with the greatest property range can be extremely expensive, selecting a material that meets your needs and your budget should be considered.

Step two is researching sizes and availability – this is where we can really help. With most of the major manufacturers as partners, we are able to source your parts from many factories. While the quality from most factories is excellent, the variable is standard and custom sheet sizes. We also stock a wide variety of materials in large Plastic Sheets In Stock, Acetal sheet, nylon sheetsheets. One of our many manufacturers is Westlake Plastics. They have been compression molding large sized sheets of many popular plastic resins; these sheets are available in 48″ X 120″ as a standard sheet size in most plastics. They produce these materials from .250″ – 3.0″ thick or thicker. Other manufacturers produce 24″ X 48″ or 48″ X 96″ sheets as standard. Please contact us for specifics on your material selection.

Most of our plastic resins are available as a sheet. This includes some of the most popular plastics, like: Polycarbonate Sheet, Acetal Sheet, PTFE Sheet, Ultem Sheet and dozens more. Sometimes, Plastic sheet is called: Plate, Strip, Bar, Slab, Block or Panel. Please think of these names as being synonyms with Plastic Sheet. Contact us with your special requirements.

In thicker gauges, plastics are frequently referred to as plate, slab or block. And strips or narrow pieces are called bar. A rose by any other name, call it what you will, the plastic starts as a flat sheet from the factory. We can cut them to size or shape. Blanking of sheets to useable sizes is our specialty. Narrow pieces used for long applications are normally called strip. Strip is common in wear type applications.

For a list of materials we have as standard stock materials, check our Plastic Sheets Page. These and many other plastic materials are available, and custom sizes, shapes and colors vary by base material. As a stocking distributor for dozens of major manufactures, we are the West Coasts leading plastic sheet supplier or distributor. If you are in need of some technical assistance go to our Plasticologist page for specific help.

Contact us for more information on plastic sheet materials. Email us or call 866-832-9315

Google+

Is Nylon Food Grade



Is Nylon Rod and Sheet Food Grade

This question was very easy to answer, up until now.

First: what is Zytel 42? It is a Natural Nylon 6/6 extrusion grade plastic resin. An extremely popular and heavily used material for machinable and durable plastic parts. For as far back as we can find information, this Zytel 42 Nylon 6/6 resin has been used in numerous food contact and food processing machine components.dupont1 300x127 Is Nylon Food Grade

We have just received notice that Dupont will be making some changes to their formula for this Nylon grade. For years we have provided our clients with Dupont Zytel 42 Nylon resin extruded into sheet, rod and other profiles. The Dupont announcement states that the Zytel 42 will no longer have a food grade rating – FDA approval. They will produce a new resin called Zytel 42FG, which will have all the approvals we always had with the Zytel 42.

Why in the world would a company do such a thing? Our guess is that this is a cleaver way to increase prices significantly without a standard and blatant price increase. Let’s just hide it in a new resin package.

Nylon Sheet, Nylon Slab and Nylon Rod are all available as these:

Zytel 42 – will still be available, but without the FDA approval

Zytel 42FG – the ‘new’ resin will carry the FDA approval, but at much higher price

Nylon Food Grade still available

What is the difference between the old Zytel 42 and the new Zytel 42FG? From what we have read so far, nothing. It is probably the same material, new name. The ‘new’ Zytel 42 is actually the new ‘dumbed’ down resin – they just took away the Food Grade label, maybe took out an ingredient or two, and viola, new Zytel 42 – non Food Grade Nylon.

This news has spread quickly through our industry. As mentioned above, we have provided this material in this grade for over 36 years for Food Grade/FDA Approved applications.

The main reason for this article is to get the news out the the marketplace. Engineers and designers have been specifying this resin for their applications, and now, with out much notice, the product they assume is Food Grade will no longer be acceptable for these applications. It is unclear at this point whether the extrusion plants will be producing product from both resins, or opting to use one or the other. It appears that Nylon Food Grade resins my become a special, or that all materials may becomes standard as Nylon Food Grade.

Is Nylon Food Grade Resin Important To You?

This is the question we find ourselves asking. Does the end user think of Nylon when they are looking for an FDA approved plastic? Or, do they consider Acetal, Delrin, Polyethylene, and other materials first? Do you think of Nylon rod, bar, sheet and slab as mechanical materials to use when making gears, wear strips, and other non FDA applications?

Please take a moment and let us know you thoughts. We value your input – it will help us in evaluating the direction we want to go with our inventory.

Stay tuned, the rumor is that Dupont will be doing something similar to their Delrin 150 resins.

Check our main website for more details on these and other plastic materials – www.iplasticsupply.com

Thank you.

Google+ – Hayden Hess