FDA – NSF Approved Cutting Boards

HDPE and UHMW Polyethylene Sheets

Next time you are cutting vegetables on your cutting board, the material most likely to be used is Polyethylene. Because it is stain, moisture and odor resistant, Polyethylene is a perfect choice. Other cutting boards made out of wood are more susceptible to bacteria and odors because they lack the properties that Polyethylene sheets offer, such as its chemical resistance and FDA approval for food Colored HDPE Cutting Boards NSF approvedcontact. Polyethylene is a very durable and lightweight material that comes in many forms and is a great for a wide variety of applications.

NSF Approved Cutting Boards

The HDPE is available in .500″ thick in several FDA / NSF approved colors, and is great for use in kitchens where cross contamination is a problem. 

The Ultimate Cutting Board

Polyethylene has many names. The most common are HDPE, LDPE, and UHMW. The difference has to with the molecular weight and branching which is when a monomer or atom is replaced by a longer chain of polymers (a long repeating chain of atoms). High Density is commonly used for milk jugs and food containers. Low Density is commonly used for bottles and plastic bags. UHMW, which has higher molecular weight (2-6 million) allows for an even transfer over the length of material which makes it stronger and able to be used for bearing applications due to its great wear resistance. Commonly used in the food and dairy industry, UHMW is a great replacement for other materials and solution to many problems. All of these polymers are derived from the same family but all have certain properties that make them a little different. HDPE provides great chemical resistance, with high impact strength and great energy absorption. LDPE has most of the same properties as High Density but is not as dense at 9.15, opposed to HDPE which is 9.34. It also has a lower tensile strength and easier formability.

UHMW is a strong material that has great durability and low co-efficient making it an ideal for sliding FDA and NSF approved UHMW machined sproketapplications. Polyethylene offers a wide range of material choices and properties and has great durability that can be suitable for a number of applications. From the food industry to automotive, the kitchen or the warehouse, whatever your Polyethylene needs are; High Density, Low Density or UHMW, Polyethylene is a great choice.

Typical Resin Properties:

General Property ASTM Test Typical Value HDPE Typical Value LDPE Typical Value UHMW
Specific Gravity D792 .941 – .965 .91 – .925 .93 – .94
Tensile Strength Yield D638 3,800 – 5,500 1,400 – 2,000 6,800
Izod Impact – Notched D256 2.0 – 3.5 >16 No Break
Vicat Softening Temp D1525 257ºF 219ºF 260
Hardness – Rockwell D785 D60 -70 D42 – 50 R64
Continuous Use Temp -100 – 180ºF 174ºF 180ºF
Deflection Temp @ 66 psi D648 171   124 174
Co. Thermal Expansion D696 7X10-5 4.6 -5.5X10-5 11.0X10-5

Please contact us for more information on FDA and NSF approved plastic materials. Email us here, or call us at: 866-832-9315

Google+ – Hayden Hess

Topic: HDPE Cutting Boards – NSF Approved

Is Nylon Food Grade



Is Nylon Rod and Sheet Food Grade

This question was very easy to answer, up until now.

First: what is Zytel 42? It is a Natural Nylon 6/6 extrusion grade plastic resin. An extremely popular and heavily used material for machinable and durable plastic parts. For as far back as we can find information, this Zytel 42 Nylon 6/6 resin has been used in numerous food contact and food processing machine components.dupont1 300x127 Is Nylon Food Grade

We have just received notice that Dupont will be making some changes to their formula for this Nylon grade. For years we have provided our clients with Dupont Zytel 42 Nylon resin extruded into sheet, rod and other profiles. The Dupont announcement states that the Zytel 42 will no longer have a food grade rating – FDA approval. They will produce a new resin called Zytel 42FG, which will have all the approvals we always had with the Zytel 42.

Why in the world would a company do such a thing? Our guess is that this is a cleaver way to increase prices significantly without a standard and blatant price increase. Let’s just hide it in a new resin package.

Nylon Sheet, Nylon Slab and Nylon Rod are all available as these:

Zytel 42 – will still be available, but without the FDA approval

Zytel 42FG – the ‘new’ resin will carry the FDA approval, but at much higher price

Nylon Food Grade still available

What is the difference between the old Zytel 42 and the new Zytel 42FG? From what we have read so far, nothing. It is probably the same material, new name. The ‘new’ Zytel 42 is actually the new ‘dumbed’ down resin – they just took away the Food Grade label, maybe took out an ingredient or two, and viola, new Zytel 42 – non Food Grade Nylon.

This news has spread quickly through our industry. As mentioned above, we have provided this material in this grade for over 36 years for Food Grade/FDA Approved applications.

The main reason for this article is to get the news out the the marketplace. Engineers and designers have been specifying this resin for their applications, and now, with out much notice, the product they assume is Food Grade will no longer be acceptable for these applications. It is unclear at this point whether the extrusion plants will be producing product from both resins, or opting to use one or the other. It appears that Nylon Food Grade resins my become a special, or that all materials may becomes standard as Nylon Food Grade.

Is Nylon Food Grade Resin Important To You?

This is the question we find ourselves asking. Does the end user think of Nylon when they are looking for an FDA approved plastic? Or, do they consider Acetal, Delrin, Polyethylene, and other materials first? Do you think of Nylon rod, bar, sheet and slab as mechanical materials to use when making gears, wear strips, and other non FDA applications?

Please take a moment and let us know you thoughts. We value your input – it will help us in evaluating the direction we want to go with our inventory.

Stay tuned, the rumor is that Dupont will be doing something similar to their Delrin 150 resins.

Check our main website for more details on these and other plastic materials – www.iplasticsupply.com

Thank you.

Google+ – Hayden Hess