American Made Plastic Sheets and Rods

Plastic Materials By Any Other Name…Made In The USA - High Quality Materials

There are hundreds of plastic manufacturers, and even more plastic sheet, rod and tube suppliers.

What makes one better or worse than another? Some of the biggest differences are in the quality of the materials they have in stock. Not all manufacturers are the same. Some produce very inexpensive materials for the disposable trade. A few supply high quality materials from the big names in the plastic industry.

We buy only from American companies. Our suppliers and warehouses are all here, in the USA. While several of our factories have parent companies in Western Europe, they manufacture the bulk of their materials here in the states. With the NAFTA requirements, we are able to provide certification to all our materials.

American Made Quality Makes A Difference

As you probably know, materials made in areas around the world don’t have the same quality control systems that we have here. We have seen materials from suppliers not in the USA or Western Europe, and have chosen to not carry any of these materials – they just don’t measure up to Made In The USA! We believe that thatAmerican Made still means something, and it transfers to the materials we supply.

Since 1975 we have partnered with the best manufacturers, with the best industrial, machinable, mechanical and professional grades of plastic materials available in the marketplace. Quality names like: Westlake Plastics, Ensinger Plastics, Gehr Plastics, Rochling Plastics, Polymer Industries, Spartech Plastics, Plaskolite, and many, many more. None of these are suppliers are newcomers, most of our suppliers have been in business producing excellent quality plastic sheet and rod for over 50 years. We are the new guys, as we started in 1975!

Buy From A Plastics ProfessionalOur real 'brick and mortar' building. Industrial Plastic Supply, Anaheim, CA - American Made Plastic Materials

How can you tell if your plastics are ‘quality’ pieces of plastic? It is a bit tough to tell by just looking, and that is what the low quality suppliers and manufacturers count on. Sometimes the only way to tell is by cutting or machining a part. We have cut into materials that literally break when a saw blade comes into contact. Some materials have stress levels so high they bow significantly as we cut through the material. See article on Stress In Plastics.

These high internal stresses show up during machining as warping, changes in tolerance, large movement in part size and stress fractures. We have seen parts move by over 5% after part was machined and within 12 hours. This picture shows a piece of glass filled nylon from one of the ‘upstarts’ in the industry. As a test, we were cutting some strips. As you can see, the part has such a high stress level that it warped away from the rest of the sheet as we cut it. This is very dangerous for a person cutting or machining, as it can stop a blade or break free and strike an employee. We chose not to buy from this new company.

Plastic Sheet and rods Proudly American Made

We have been around the block a few times, and we know most of the things that will cause you problems in a material. That is why we only buy from the big guys, the high quality material manufacturers, the well known – tried and true manufacturers. We buy from the experts, the professionals, the leaders in our plastics industry. Supplying industrial grade plastics to machine shops may seem like an easy thing. We treat this process with the respect it deserves; your parts are important to you and your customers. We won’t let you down by providing unacceptable grades of plastic materials. Our parts aren’t stressed out!

Call on us today – 866-832-9315 and ask for a Plasticologist, or email us for more information about the quality materials we supply.

Google+



PLASTICS IN THE MEDICAL FIELD Polyethylene Bags

When we think of plastic, we think of plastic bags you get at the grocery store or maybe your child’s toy that’s made out of cheap throw away material. If you stop and think about it, plastic is everywhere and it’s uses are almost infinite. Take Acetal or Delrin® ( a Dupont brand name) as it is more commonly know. It is a plastic that replaces metal in numerous applications and is used to make gears, screws and other hard working parts. Consider PTFE for instance which is used to coat your frying pan to make it non-stick, make steam valves and fittings, and chemical resistant parts. Another material is Polycarbonate or Lexan® (a SABIC brand name -formerly G.E. Plastics) which is used to replace glass because it is shatter resistant and is also used for bullet resistant glazing and riot shields. Even the cup of coffee you grab for every morning is made of foamed Styrene – Styrofoam. But plastic has shaped our lives in countless ways, many of them you might not even think of or notice.

Plastic used in medical replacements for limbsPlastics play a big part in the world of medicine. Some other advancements in the area of medicine include assisting people with debilitating injuries and serious afflictions, helping them feel more comfortable and move easier. Prosthetic limbs and joint replacements have come along way since the old days of metal and wood. Since the late 90’s UHMW or (Ultra High Molecular Weight Polyethylene) has become the standard in hip and joint replacements. With plastics like UHMW, which has great wear resistance, excellent strength and very low co-efficient of friction (very slippery), it has made people who need these surgeries have better mobility and better quality of life. These plastics also make prosthetic limbs lighter and stronger for athletes who wish to compete and lead near normal active lifestyles due to the use of plastic polymers (derived from the Greek meaning ‘many parts’) mimicking human flexibility. Prosthetic devices date all the way back to the ancient Egyptians where they used leather and wood for toe and foot replacements. But thanks to today’s technologies and advancements in as plastic, most amputees and athletes can regain their quality of life and enabling them to do what they love.

What has Medical Plastic Done For You Lately?

Another plastic material that has changed the medical field is PEEK (Polyetheretherketone). This material is a newer plastic which has high Natural PEEK Medical Grade Rodchemical resistance along with excellent high continuous temperature resistance of up to 480 degrees fahrenheit. PEEK has replaced many metal devices in the medical field, because PEEK is one of the only thermoplastics (plastic which can be bent or shaped) able to withstand high doses of radiation over an extended lifetime. In addition PEEK is used to help many people awaiting kidney transplants because it is used to make a critical component in dialysis machines. These machines need to clean the blood over a period of several hours and because of this, PEEK is the natural solution, as it can be steam cleaned time and time again with little effect on the material. Along with its great chemical, temperature, and fluid handling stability, PEEK is USP Class VI, making it ideal for these types of medical applications. The natural color of PEEK is a beige to tan and is available in sheet and rod. One of the largest manufacturers of PEEK resin is Victrex and their 450G resin.

Plastics In Medicine – Everyday

Plastic materials have become apart of our lives and has changed the way we take care of the sick and injured, how we protect our foods from germs, and prolong the storage of foods. Plastics protect medical instruments and insure they are sterile. It has made people’s lives better in both the short and long term. It has helped reduce pain, gain better movement and has given people their confidence back. The values of plastic can not be understated and in the future, hopefully plastics will save or prolong many more lives through advancements in technology and the limitless possibilities it presents.

For more information on these and other medical grade plastics like: Clear Nylon (look for blog post on this), Ultem, Polysulfone, Radel and more, contact us. E-mail us or call 866-832-9315

Google+