Gehr Plastics Announces Huge 24″ Diameter Acetal Rod

Gehr Plastics is an industry leader in large high performance plastic materials. They announced at this years IAPD Conference in San Diego, the new production of 24″ diameter (600mm) Natural Copolymer Acetal Rod.

Gehr Plastics 24

24″ Diameter Is Worlds Largest Acetal Rod

Gehr Plastics has been an innovator in the large cross section plastics market. This new 24″ diameter (600mm) is the Worlds Largest Copolymer Acetal Rod. They also produce a Copolymer Acetal Sheet that is 8.0″ thick, also the Worlds Largest.

Being an industry leader is more than making the largest material, it is also about making the best quality material. Gehr Plastics is ISO 9001 and ISO 14001 approved and certified, guaranteeing a consistently high quality product. The product line that Gehr Plastics produces is also quite large. The materials include: ABS, Acetal (POM-C and POM-H), HDPE, Kynar, Noryl, Nylon, PEEK, PEI, Polypropylene, Polysulfone, PPO, PVC (Type 1, Type 2 and CPVC), PVDF and Ultem materials. All of these materials are available in a wide range of sizes, and yes, some of the largest.

Gehr Plastics Long History

Gehr Plastics has been leading the industry in innovation since 1932, and is now in the third generation of family owned and operation. From the wide range of materials to the extremes in size range, this is cutting edge performance from a family run company. They also released a web-app for picking plastic materials, Gehr Plastic Selection Tool, and it is also available for mobile devices. This comparison tool compares not only plastics, but metals as well, for a great look at the best physical properties for an application.

While quality and size are keystones to excellence, Gehr Plastics is also interested in materials that the rest of the industry has not considered. Over the last several years, Gehr has produced some PLA materials (made from plants) and even a Clear Nylon Rod for higher temperature sight-glass applications. These are just a few of the cutting edge areas that Gehr Plastics is leading in this industry.

Industrial Plastics is Master Distributor

Gehr Plastics materials are sold through a tight network of Master Distributors throughout the United States. Industrial Plastic Supply, Inc. of Anaheim, CA is proud to be one of the top selected suppliers of these innovative materials. Contact us for any of these high quality and wide size range materials, call us @ 866-832-9315 or send us a note here.

Google Author – Hayden Hess

Share


About Plastic Sheet Material

Plastic Sheet, Sheets and Sheeting materials In Stock

Today’s topic is all about industrial plastic sheet materials in flat sheet or sheets. Also known as plate, slab, strip and bar.

Most plastic materials are processed into sheets or rods. Rods are round, sheet is flat, square or rectangular. These two basic shapes are both generally extruded, although sheet can also be compression molded. Almost all plastic raw materials are available in sheet, and in a huge range of sizes. Most materials are available from .063″ to over 4″ in thickness; and some as thick as 8″ (how to measure thickness accurately, use a 6-Inch Digital Caliper with Extra-Large LCD). Sheet sizes vary, but generally most plastics are produced in 48″ X 96″ sheets or larger, but once again this changes with types of materials and thickness desired. We can help with almost any plastic material.

Need Help Picking a Plastic Sheet Material?

Deciding on the proper material for an application is the first step. Start by reviewing our Plastic Materials Selection Guide to help narrow your search. Having the key properties and needs of your project in mind will help you with this step. Also looking at both the pro’s and con’s of a material will assist in this search. Materials with the greatest property range can be extremely expensive, selecting a material that meets your needs and your budget should be considered.

Step two is researching sizes and availability – this is where we can really help. With most of the major manufacturers as partners, we are able to source your parts from many factories. While the quality from most factories is excellent, the variable is standard and custom sheet sizes. We also stock a wide variety of materials in large Plastic Sheets In Stock, Acetal sheet, nylon sheetsheets. One of our many manufacturers is Westlake Plastics. They have been compression molding large sized sheets of many popular plastic resins; these sheets are available in 48″ X 120″ as a standard sheet size in most plastics. They produce these materials from .250″ – 3.0″ thick or thicker. Other manufacturers produce 24″ X 48″ or 48″ X 96″ sheets as standard. Please contact us for specifics on your material selection.

Most of our plastic resins are available as a sheet. This includes some of the most popular plastics, like: Polycarbonate Sheet, Acetal Sheet, PTFE Sheet, Ultem Sheet and dozens more. Sometimes, Plastic sheet is called: Plate, Strip, Bar, Slab, Block or Panel. Please think of these names as being synonyms with Plastic Sheet. Contact us with your special requirements.

In thicker gauges, plastics are frequently referred to as plate, slab or block. And strips or narrow pieces are called bar. A rose by any other name, call it what you will, the plastic starts as a flat sheet from the factory. We can cut them to size or shape. Blanking of sheets to useable sizes is our specialty. Narrow pieces used for long applications are normally called strip. Strip is common in wear type applications.

For a list of materials we have as standard stock materials, check our Plastic Sheets Page. These and many other plastic materials are available, and custom sizes, shapes and colors vary by base material. As a stocking distributor for dozens of major manufactures, we are the West Coasts leading plastic sheet supplier or distributor. If you are in need of some technical assistance go to our Plasticologist page for specific help.

Contact us for more information on plastic sheet materials. Email us or call 866-832-9315

Google+

Large engineering plastic from Gehr Plastics

One of our secret claims to fame

Since 1975 we have provided large diameter plastic rods and thick plastic sheets, plates, slabs and blocks. One of our long time ‘secret’ sources has been Gehr Plastics. Since 1932 the Gehr family has owned and operated the Gehr Plastics company. They are a worldwide leader in semi-finished plastic shapes in thermoplastics, primarily sheet and rod. The headquarters for Gehr Plastics is in Mannheim, in south western Germany. For almost 30 years, Gehr Plastics has had production facilities in the Philadelphia area, providing the USA with the same high quality plastic shapes. When we mention large diameter rod, we mean it! Gehr can produce plastic rod up to almost 20″ diameter in several grades of plastic. They also produce sheet plastics up to 8″ thick, and make the largest materials of most manufacturers of plastic sheets and rods.

At Gehr Plastics, Quality Engineering Plastic Comes First

Our first purchases with Gehr Plastics was in the PVC rod family. Once again, they make huge cross sections in many materials, including the PVC rod. Many manufacturers struggle with large sections of PVC rod because keeping it void free throughout the large diameter is very difficult. Not for Gehr Plastics, they specialize in engineering plastic materials. We have chosen this high quality manufacture for their exceptional product quality. We know the demands of our client base, and only choose the best factories to supply our products. Gehr is definitely one of the premier plastics producers in the world. While the quality of the PVC rod is excellent, the rest of the Gehr Plastics product line is also some of the best plastic semi-finished shapes available in the market place. Here is a list of some of the many materials that Gehr Plastic produces:

Many of the above items are also available in sheets, plates, slabs or blocks.Gehr Plastics PVC, ABS, POM-C, Acetal and Ultem Rods engineering plastic specialists

Gehr Plastics – one of our engineering plastic partners

We have been proud to offer the complete line of plastic rod, sheet, slab, plate and block from Gehr Plastics, and consider them a highly valued partner in supplying these engineering plastic materials to you, our valued client. For more information on the size range, availability and pricing on these and other plastic materials, click here or call us at 866-832-9315

Google+

Topic: Gehr Plastics – supplier of engineering plastic materials



Innovative Plastics Manufacturer

Produces Innovative Sheet and Rod Materials

Gehr Plastics has been a major global manufacturer in the plastic sheet and rod industry since 1932. During this period, Gehr has become a leader in a variety of product lines, and also become known for very large sizes in both sheet and rod. Currently Gehr can produce Acetal rod up to 20″ in diameter and sheets up to 8″ thick. Gehr Plastics PVC, ABS, POM-C, Acetal and Ultem Rods  Some of the many plastic materials the Gehr produces:

Winner of the 2008 Bioplastics Award

Bio Based EcoGehr Plastic Rod Being innovative also means looking forward. Gehr was selected as the Bioplastics manufacturer of the year in 2008, partly for the new line of plastic materials which have a bio base. These materials have a variety of bio based forms, including: a PLA base, Cellulose based, Polyamide and Wood – Plastic Composite (WPC). One such material is ECOGEHR PLA-L which is a blend of polylactic (polylactic acid), some lignine, fatty acid and wax. This biopolymer is new to our industry and can be used in temperatures ranging from -22 °F to +140 °F. This complete line of materials is one of the only available in the plastic industry to be comprised of many renewable raw materials. Gehr leads the way in this exceptional and innovative product line.

ClearGehr Polyamide Rod

This brand new product is a Clear Polyamide rod. The outside surface is as extruded, and can be polished. This enables the production of a relatively clear sight glass quality material with most of the high end properties of Polyamide – Nylon material. We have supplied this material for small machined parts where neither Polycarbonate nor Acrylic would work well. Because of the natural inherit chemical resistance of Polyamide, this high end ClearGehr rod can out perform all normal transparent plastics. Give us a call to see if this new innovative product will work in your difficult application.

FDA Approved Wear Grade Acetal

Have you been looking for an extended wear Acetal material (like the PTFE filled Acetals – Delrin AF), but need it to be FDA approved? Then perhaps you should consider WearGehr. This propriatary filled Acetal material has excellent wear resistance, and retains the FDA approval of the base Acetal, unlike the PTFE filled Acetals which are not FDA approved. It is made in a blue color for easy identification, also it remains very machinable. Contact us for more information on this excellent high tech material. Call us at 866-832-9315 or send us a note here.

Google+ – Hayden Hess