Dupont Delrin rod and Acetal Rods

Many of our clients assume that Delrin rod and Acetal rod is the same thing. This is not quite true. Yes, all Delrin rod is Acetal rod, but not all Acetal rod is Delrin rod. Delrin is a trade name for Homo-Polymer Acetal made by Dupont. This is the most recognized of all Acetal materials, but far from the only available Acetal material.Black and Natural Acetal - Delrin Rod
The Co-Polymer Acetal is produced by a wide variety of large plastic manufacturers, BASF is probably one of the largest and most well known. Some main resin names are: BASF Ultraform H4320, Kepital F10-02, or Hostaform M25. While Delrin is a wonderful material, in larger cross sections or larger diameters, the Delrin brand Homo-Polymer can exhibit center line porosity. This can sometimes be seen with the naked eye, and is a darker white in a normally milky white natural colored material. This center line porosity can cause problems in some applications. This porosity can cause leakage of fluid if under pressure, or ‘soft centers’ of Delrin Rod and Delrin Sheet.

This should not stop you from considering Delrin though. Many other properties of the Delrin resin are superior to the Co-Polymer resins. These properties are:

General Property ASTM
Test
Typical Value
Unfilled Delrin®

Homo-Polymer
Typical Value
Unfilled Co-Polymer
Specific Gravity D792 1.42 1.40
Tensile Strength Yield D638 9,600 – 11,000 9,000 – 10,200
Tensile Modulus D638 450,000 400,000
Izod Impact – Notched D256 1.2 1.0
Hardness – Rockwell D785 M94 M90
Deflection Temp @ 264psi D648 257 220
Deflection Temp @ 66 psi D648 347 335
Water Absorption @ 24 hrs
% 0.24 0.25
Co. Thermal Expansion D696 6.83X10-5 5.4X10-5

The key properties that Delrin are: higher tensile strength, increased Izod impact, higher deflection temperatures and it is slightly harder. The co-efficient of thermal expansion is a bit higher, and needs to be considered when designing a new part. Delrin brand material also comes in several resin variations, including: Delrin 150 and Delrin 507, contact us for details.

Many of our clients prefer the Delrin brand rod and sheet for small machined parts. This is due to the increase in a few key properties, and of course brand recognition. Both resins meet the standard ASTM-D-6778, and the cancelled specs, L-P-395 and ASTM-D-4181.Colored Acetal - Delrin Rod - Pomalux

The Acetal family of plastic resins are excellent for wear resistance, great mechanical strength, and superior machining properties. It is available in a huge range of sizes and shapes. Click here for more details on Acetal – Delrin Rod, and sometimes referred to as plastic dowel. We also have the capacity to supply colored Acetal – Delrin rod; click here from more details on the colored Acetal material.

Similar materials to Acetal – Delrin are Nylon Rod, PET Rod and Noryl Rod. Most materials are available as round rod, square rod, bar, strip, sheet and plate.

Please contact us for more details on these and other plastic materials. For a comparison chart of plastic materials click here: Plastic Materials Selection Guide

Google+


Can we get colored Acetal – Delrin Rod?

We get this question frequently. The easy answer is yes, however, the most common available colors are Black and Natural (white in color). But to continue the thought, we have several manufacturers that run ‘Medical’ grades of Acetal – Delrin in several colors. Colored Acetal - Delrin Rod - Pomalux These materials are special run, but can frequently purchase by the standard length without a custom run. The biggest factor may be the price. The colored Acetal – Delrin materials are dramatically more expensive.

Colored Acetal – Delrin Rod

While price is a factor, the benefits may out weigh the cost. Many of our clients use these colored rods to help differentiate their product from their competition. With colors that can come close to a logo color or match a machine, these advantages are clearly visible. Having a special color available to machine small to medium runs of your product can save you thousands over molding a new part for trials. What colors can I get in Acetal – Delrin Rod? The range is a bit limited, but does include: brown, dark blue, dark green, gray, light blue, light green, red, rust and yellow (and of course Natural and Black). For details on the properties of these materials click here: Acetal – Delrin. For specifics on your requirement, please contact us for availability and pricing. Email or call 866-832-9315

Looking for the differences between Acetal and Delrin materials, click here.

Google+ – Hayden Hess