From Plywood To Polycarbonate Sheet

People in the plastics industry have known for over 50 years that Polycarbonate Sheets are tough. This clear plastic sheet material is commonly used to replace window glazing. The best known property for this sheet materials is that it is break resistant, or in many cases, unbreakable. This is a great benefit for areas where window glass is broken easily.

Recently some cities have passed ordinances to change out the plywood window coverings on abandoned homes, and they are installing clear polycarbonate sheets instead. This is a very attractive replacement, and is a big step in fighting the blight of abandoned homes.

Polycarbonate is produced under several trade names, including Covestro Makrolon®, SABIC Lexan®, Cyrolon®, Zelux®, Tuffak® and many more. These materials are available in sheets, plate, slab, bar and rod.

Read more on this material below.

Cities moving from Plywood to Polycarbonate Sheet Protection for abandoned homes Why Use Makrolon Polycarbonate Sheet To Replace Plywood? Why Use Makrolon Polycarbonate Sheet To Replace Plywood? Replacing Plywood with Clear Polycarbonate sheets PR

Excerpt from AZCentral, The Arizona Republic:

Property owners and banks in Phoenix had begun outfitting windows with sheets of polycarbonate, a thin, nearly indestructible plastic that mirrors the appearance of glass.

And last month, the city became among the first in the U.S. to make polycarbonate windows a matter of municipal law.

Phoenix now requires all window and door openings visible from the street to be secured with the material if the structure has been unoccupied for more than 90 days. The 90-day provision is also new, replacing the previous deadline of 180 days. The measures were the result of an abandoned buildings task force that Gallego spearheaded.

Read the rest of the story, and see Phoenix City Councilman Michael Nowakowski and City Manager Ed Zuercher attempt to break a polycarbonate window in Phoenix: http://www.azcentral.com/story/news/local/phoenix/2015/04/02/phoenix-fights-blight-plastic-windows/70826784/

Durham County, North Carolina also made a change:

By Taylor Knopf, tknopf@newsobserver.com

No one likes living next to abandoned buildings with boarded up doors or windows. So the city of Durham started replacing the plywood eyesores with a clear, durable plastic.

The city is working to reduce the number of abandoned houses by helping owners fix them up. But for houses that still need boarding up, the city has found that plastic not only improves the overall appearance of a neighborhood, it may reduce crime by discouraging squatters and making it easier for police to see inside vacant buildings.

“I can’t stress enough how the elimination of the boards has a tremendous positive impact on neighborhoods and communities,” said Faith Gardner, housing code administrator of the city’s department of neighborhood improvement services.

Read more here: http://www.newsobserver.com/news/local/counties/durham-county/article20778429.html#storylink=cpy

These communities have fought back against vandalism and crime, as well as enhanced the value of local homes by changing from Plywood to Clear Polycarbonate Sheets. This super tough Bullet resistant Polycarbonate Sheet Why Use Makrolon Polycarbonate Sheet To Replace Plywood? Why Use Makrolon Polycarbonate Sheet To Replace Plywood? polycarbonate sheet riot shieldsclear material is the same kind of material that Police Officers use for face shields and banks use for bullet resistant glazing.

The premier manufacturer of Polycarbonate Sheet in the USA is Covestro (formerly Bayer MaterialScience), and they produce Makrolon Polycarbonate Sheet. Polycarbonate is also available in rod and thick plate for machined parts.

Consider using Polycarbonate sheet for your next glazing material.


Share Why Use Makrolon Polycarbonate Sheet To Replace Plywood? Why Use Makrolon Polycarbonate Sheet To Replace Plywood? send to friend button e1443652948159

Topic: Plywood to Polycarbonate Sheet

Things you should know about Polycarbonate Sheet, Sheets and Panels

A common misconception is that ‘all polycarbonate sheets are the same’. This is not true, as a matter of fact, it is far from a fact. While most manufacturers of polycarbonate sheets start with a similar base resin, this is where the similarities normally stop. Most polycarbonate sheet extruders run a base material far different from what the standard has been for the last 30 years. Most polycarbonate sheet is now made without the flame rating it had in the past. Polycarbonate Sheets are sometimes called ‘polycarbonate panels’ or ‘polycarbonate plates’, they are still made from the same high quality resins. One of the best known manufacturers of Polycarbonate resins and sheets is Sabic Polymers®, the manufacturers of Lexan® resin and Lexan® Sheet products. Over the last several years, Sabic has quietly discontinued the UL ratings on their Polycarbonate.

Industrial Plastic Supply And Makrolon GPBayer MaterialScience now Covestro Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Bayer to Covestro

For more than 30 years, Industrial Plastic Supply has relied on the high quality Polycarbonate Sheets produced by Sheffield, now part of Covestro (formerly Bayer MaterialScience). Covestro produces a crystal clear, ultra high impact strength resin, this Makrolon resin is the finest in the industry. Covestro has also chosen to continue to produce this high quality material with the UL 94 V-0 rating, the only supplier to continue this expensive, but extremely valuable service. Take a moment and look at your requirements, see if perhaps somewhere on the blue print is a note that states your polycarbonate material needs to be UL 94 V-0 approved or rated. If so, Makrolon GP is your only and best choice!

How is Covestro Makrolon Polycarbonate available

We stock Covestro (Bayer MaterialScience) Makrolon GP in flat panels, considered Polycarbonate Sheet or as Polycarbonate Sheets. We can cut theses sheet Polycarbonate materials to strip or strips, blocks, or just a cut to size piece. At Industrial Plastic Supply we have stocked large quantities of these materials, and continue to keep Makrolon GP and Makrolon FI sheets in stock. With a wide range of thicknesses ( .030″ – .500″ thick) and sheet sizes of 48″ X 96″, 60″ X 60″ and 72″ X 96″ as standard in .118″ – .500″, we can fill all your requirements.Covestro (Bayer) Makrolon GP Polycarbonate Sheets formed into Riot Shields Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels polycarbonate sheet riot shields

Why you should use Makrolon Polycarbonate Sheet

Superior clarity, quality, surface finish, flame retardant and full USA factory technical assistance are just a few reasons. Buying polycarbonate sheets imported from somewhere half way around the globe, from an unknown manufacturer with little or no technical support can be very risky. Covestro/Sheffield manufacturers this premium quality polycarbonate sheet right here in the good old USA, in Sheffield, Massachusetts. They produce this crystal clear sheet on the latest and most technologically advanced extruders available, and have several warehouses for us to get material quickly for you. Why settle for an unknown? Can you afford to ‘try’ the other guys? Step up to the finest quality, and yet still competitively priced polycarbonate sheet, get Covestro Makrolon GP Polycarbonate Sheet for your next project. Industrial Plastic Supply also carries the Westlake Zelux M Polycarbonate Sheet and Zelux W Polycarbonate Plate. The Zelux M is a machine grade Polycarbonate Plate from .375″ – 4″ thick sheet, and the Zelux W is a clear – Window Grade thick Polycarbonate Plate in the same thickness range. Contact us for more information on this thicker material. We also supply other manufacturers grades of Polycarbonate Plate, including, but not limited to: Ensinger Plastics, Nytef Plastics, Rochling Plastics and more.Machined Polycarbonate Block made from Zelux M Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Polycarb Part Contact us for more information or technical assistance on Polycarbonate or any other quality plastic sheet, rod or tube. Call us at 866-832-9315 or send us a quick note here. Google+



Share Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels send to friend button e1443652948159