Plastic Strip is common in other materialsPlastic Strip, plastic Strips and Plastic Tapes, Plastic Bar Available Materials Plastic Strip and Strips For Food Processing and Material Handling Available Materials Plastic Strip and Strips For Food Processing and Material Handling plastic strip and tape

A common standard item in the metals industry is ‘strip’. Strip is normally a piece of material that is 1/16″ – 3/8″ thick and 1.0″ – 4.0″ wide, although thicker and wider materials can also be referred to as strip. The metals industry produces various metals in these sizes of strip. In the plastics industry, strip is something we cut from larger sheets. The sizes are the same as listed above, but are cut from 48″ X 96″ or 48″ X 120″ sheets.

The a few of the most common plastics materials we cut to plastic strips are:

HDPE (High Density Polyethylene)

PTFE, TFE (Polytetrafluoroethylene)

UHMW – Ultra High Molecular Weight Polyethylene

Acetal / Delrin

Nylon – Polyamide

PVC – Polyvinylchloride

Polycarbonate – Covestro (Bayer) Makrolon

Most plastics can be cut to these strip sizes, with various lengths available depending on type of material. In some materials and in some sizes, depending on quantity, special run to size plastic strip is available. These special run plastic strips can be run to almost any length. Specifically, in the UHMW and PTFE materials, much longer lengths are available in rolls of material. The UHMW can be purchased in standard and adhesive back varieties. This UHMW with adhesive is a commonly used item in the wear strip applications because of its ease of installation. A large market for this kind of strip is in the food processing industry for all wear points and to reduce noise in the plant. Some of these same sizes with adhesive on the back are available in the PTFE, and are available in long tape style rolls. In some cases, colors other than natural are available, contact us for details. Plastic Strip, plastic bar, excellent in food processing and material handling Available Materials Plastic Strip and Strips For Food Processing and Material Handling Available Materials Plastic Strip and Strips For Food Processing and Material Handling material handling

Plastic Strip and Strips are available in special sizes

With the massive range of plastics available, and most of these materials available to be cut to strips, the nearly unlimited amount of choices in plastic strip availability make this post difficult to be all inclusive. Great material for the industrial, food processing, material handling, automotive and recreational industries.

Most plastics are available in large sheets, and we can cut these sheets to strip for you. Also, depending on the material, size and quantity, we can custom extrude your strip in longer lengths and to your requirements. Decide on a type of plastic, determine the size and quantity, and give us a call. Use your imagination, we can help.

If you have a project where strips would be ideal, please contact us to see if the type of material you need is available in the strip configuration that would be beneficial. Call us at: 866-832-9315 or drop us an email and we will be happy to go to work on your requirement.


Share Available Materials Plastic Strip and Strips For Food Processing and Material Handling Available Materials Plastic Strip and Strips For Food Processing and Material Handling send to friend button e1443652948159

Topic: Plastic Strip and Plastic Strips – Strip Plastics

Things you should know about Polycarbonate Sheet, Sheets and Panels

A common misconception is that ‘all polycarbonate sheets are the same’. This is not true, as a matter of fact, it is far from a fact. While most manufacturers of polycarbonate sheets start with a similar base resin, this is where the similarities normally stop. Most polycarbonate sheet extruders run a base material far different from what the standard has been for the last 30 years. Most polycarbonate sheet is now made without the flame rating it had in the past. Polycarbonate Sheets are sometimes called ‘polycarbonate panels’ or ‘polycarbonate plates’, they are still made from the same high quality resins. One of the best known manufacturers of Polycarbonate resins and sheets is Sabic Polymers®, the manufacturers of Lexan® resin and Lexan® Sheet products. Over the last several years, Sabic has quietly discontinued the UL ratings on their Polycarbonate.

Industrial Plastic Supply And Makrolon GPBayer MaterialScience now Covestro Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Bayer to Covestro

For more than 30 years, Industrial Plastic Supply has relied on the high quality Polycarbonate Sheets produced by Sheffield, now part of Covestro (formerly Bayer MaterialScience). Covestro produces a crystal clear, ultra high impact strength resin, this Makrolon resin is the finest in the industry. Covestro has also chosen to continue to produce this high quality material with the UL 94 V-0 rating, the only supplier to continue this expensive, but extremely valuable service. Take a moment and look at your requirements, see if perhaps somewhere on the blue print is a note that states your polycarbonate material needs to be UL 94 V-0 approved or rated. If so, Makrolon GP is your only and best choice!

How is Covestro Makrolon Polycarbonate available

We stock Covestro (Bayer MaterialScience) Makrolon GP in flat panels, considered Polycarbonate Sheet or as Polycarbonate Sheets. We can cut theses sheet Polycarbonate materials to strip or strips, blocks, or just a cut to size piece. At Industrial Plastic Supply we have stocked large quantities of these materials, and continue to keep Makrolon GP and Makrolon FI sheets in stock. With a wide range of thicknesses ( .030″ – .500″ thick) and sheet sizes of 48″ X 96″, 60″ X 60″ and 72″ X 96″ as standard in .118″ – .500″, we can fill all your requirements.Covestro (Bayer) Makrolon GP Polycarbonate Sheets formed into Riot Shields Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels polycarbonate sheet riot shields

Why you should use Makrolon Polycarbonate Sheet

Superior clarity, quality, surface finish, flame retardant and full USA factory technical assistance are just a few reasons. Buying polycarbonate sheets imported from somewhere half way around the globe, from an unknown manufacturer with little or no technical support can be very risky. Covestro/Sheffield manufacturers this premium quality polycarbonate sheet right here in the good old USA, in Sheffield, Massachusetts. They produce this crystal clear sheet on the latest and most technologically advanced extruders available, and have several warehouses for us to get material quickly for you. Why settle for an unknown? Can you afford to ‘try’ the other guys? Step up to the finest quality, and yet still competitively priced polycarbonate sheet, get Covestro Makrolon GP Polycarbonate Sheet for your next project. Industrial Plastic Supply also carries the Westlake Zelux M Polycarbonate Sheet and Zelux W Polycarbonate Plate. The Zelux M is a machine grade Polycarbonate Plate from .375″ – 4″ thick sheet, and the Zelux W is a clear – Window Grade thick Polycarbonate Plate in the same thickness range. Contact us for more information on this thicker material. We also supply other manufacturers grades of Polycarbonate Plate, including, but not limited to: Ensinger Plastics, Nytef Plastics, Rochling Plastics and more.Machined Polycarbonate Block made from Zelux M Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Polycarb Part Contact us for more information or technical assistance on Polycarbonate or any other quality plastic sheet, rod or tube. Call us at 866-832-9315 or send us a quick note here. Google+



Share Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels Bayer and Westlake Polycarbonate Sheet, Sheets, Plate and Panels send to friend button e1443652948159

Is Lexan® the same as Makrolon® or Polycarbonate?

The short answer is no, are they very similar, yes. The reason is that both Lexan® and Makrolon® are brand names, along with Hyzod®, Cyrolon®, Zelux®, Paltuf®, Tuffak®, Ensicar®, Unicar®, Texin®, Apex® and many more. Lexan® is a brand name for SABIC (Saudi Basic Industries Corporation) which acquired the entire General Electric Plastics division several years ago. Makrolon® (formerly Hyzod®) is a trade name for Covestro (formerly Bayer MaterialSciences).

These materials are all Polycarbonate which is a very tough, high impact plastic material. The base resins are very similar, however, the end product varies quite a bit depending on the manufacturer. The Covestro Bayer Makrolon® GP-V material does meet the UL 94 V-0 flame retardant certification (at .220″ thick), and the Makrolon® GP is UL 94 HB rated.

How do I tell the difference between Lexan® and Makrolon®?

Bayer MaterialScience now Covestro Is Lexan® the same as Bayer Makrolon® or Polycarbonate Is Lexan® the same as Bayer Makrolon® or Polycarbonate Bayer to Covestro

It would be impossible to tell the difference between brands by just looking, unless it still has the masking on, it would take some testing. The majority of both brands of materials are available in a very clear, UV stabilized glazing grade and look identical to the naked eye. This material is excellent for replacing window glass and is virtually unbreakable.

 

Industrial Plastic Supply stocks the Covestro (Bayer) Makrolon® GP Polycarbonate materials in stock and ready for shipment. We have chosen to carry the Covestro Makrolon® Polycarbonate because of its superior quality, physical properties and ratings. You will find these materials available as sheet and rod here. If you have further questions, or would like to see the data sheet on Makrolon® Polycarbonate and/or Lexan® Polycarbonate for comparison, please give us a call: 866-832-9315 or email: request@indplastic.com

This post is part of our effort to answer as many questions for you as possible, and to assist you in choosing the proper material for your applications, this is another very popular question we hear.

Yes, Lexan® and Makrolon® are both Polycarbonate materials. And we believe that the Covestro Makrolon® is the best Polycarbonate sheet available in the market place.

Google+ – Industrial Plastic Supply, Inc.