American Made Plastic Sheets and Rods

Plastic Materials By Any Other Name…Made In The USA - High Quality Materials

There are hundreds of plastic manufacturers, and even more plastic sheet, rod and tube suppliers.

What makes one better or worse than another? Some of the biggest differences are in the quality of the materials they have in stock. Not all manufacturers are the same. Some produce very inexpensive materials for the disposable trade. A few supply high quality materials from the big names in the plastic industry.

We buy only from American companies. Our suppliers and warehouses are all here, in the USA. While several of our factories have parent companies in Western Europe, they manufacture the bulk of their materials here in the states. With the NAFTA requirements, we are able to provide certification to all our materials.

American Made Quality Makes A Difference

As you probably know, materials made in areas around the world don’t have the same quality control systems that we have here. We have seen materials from suppliers not in the USA or Western Europe, and have chosen to not carry any of these materials – they just don’t measure up to Made In The USA! We believe that thatAmerican Made still means something, and it transfers to the materials we supply.

Since 1975 we have partnered with the best manufacturers, with the best industrial, machinable, mechanical and professional grades of plastic materials available in the marketplace. Quality names like: Westlake Plastics, Ensinger Plastics, Gehr Plastics, Rochling Plastics, Polymer Industries, Spartech Plastics, Plaskolite, and many, many more. None of these are suppliers are newcomers, most of our suppliers have been in business producing excellent quality plastic sheet and rod for over 50 years. We are the new guys, as we started in 1975!

Buy From A Plastics ProfessionalOur real 'brick and mortar' building. Industrial Plastic Supply, Anaheim, CA - American Made Plastic Materials

How can you tell if your plastics are ‘quality’ pieces of plastic? It is a bit tough to tell by just looking, and that is what the low quality suppliers and manufacturers count on. Sometimes the only way to tell is by cutting or machining a part. We have cut into materials that literally break when a saw blade comes into contact. Some materials have stress levels so high they bow significantly as we cut through the material. See article on Stress In Plastics.

These high internal stresses show up during machining as warping, changes in tolerance, large movement in part size and stress fractures. We have seen parts move by over 5% after part was machined and within 12 hours. This picture shows a piece of glass filled nylon from one of the ‘upstarts’ in the industry. As a test, we were cutting some strips. As you can see, the part has such a high stress level that it warped away from the rest of the sheet as we cut it. This is very dangerous for a person cutting or machining, as it can stop a blade or break free and strike an employee. We chose not to buy from this new company.

Plastic Sheet and rods Proudly American Made

We have been around the block a few times, and we know most of the things that will cause you problems in a material. That is why we only buy from the big guys, the high quality material manufacturers, the well known – tried and true manufacturers. We buy from the experts, the professionals, the leaders in our plastics industry. Supplying industrial grade plastics to machine shops may seem like an easy thing. We treat this process with the respect it deserves; your parts are important to you and your customers. We won’t let you down by providing unacceptable grades of plastic materials. Our parts aren’t stressed out!

Call on us today – 866-832-9315 and ask for a Plasticologist, or email us for more information about the quality materials we supply.

Google+

Large engineering plastic from Gehr Plastics

One of our secret claims to fame

Since 1975 we have provided large diameter plastic rods and thick plastic sheets, plates, slabs and blocks. One of our long time ‘secret’ sources has been Gehr Plastics. Since 1932 the Gehr family has owned and operated the Gehr Plastics company. They are a worldwide leader in semi-finished plastic shapes in thermoplastics, primarily sheet and rod. The headquarters for Gehr Plastics is in Mannheim, in south western Germany. For almost 30 years, Gehr Plastics has had production facilities in the Philadelphia area, providing the USA with the same high quality plastic shapes. When we mention large diameter rod, we mean it! Gehr can produce plastic rod up to almost 20″ diameter in several grades of plastic. They also produce sheet plastics up to 8″ thick, and make the largest materials of most manufacturers of plastic sheets and rods.

At Gehr Plastics, Quality Engineering Plastic Comes First

Our first purchases with Gehr Plastics was in the PVC rod family. Once again, they make huge cross sections in many materials, including the PVC rod. Many manufacturers struggle with large sections of PVC rod because keeping it void free throughout the large diameter is very difficult. Not for Gehr Plastics, they specialize in engineering plastic materials. We have chosen this high quality manufacture for their exceptional product quality. We know the demands of our client base, and only choose the best factories to supply our products. Gehr is definitely one of the premier plastics producers in the world. While the quality of the PVC rod is excellent, the rest of the Gehr Plastics product line is also some of the best plastic semi-finished shapes available in the market place. Here is a list of some of the many materials that Gehr Plastic produces:

Many of the above items are also available in sheets, plates, slabs or blocks.Gehr Plastics PVC, ABS, POM-C, Acetal and Ultem Rods engineering plastic specialists

Gehr Plastics – one of our engineering plastic partners

We have been proud to offer the complete line of plastic rod, sheet, slab, plate and block from Gehr Plastics, and consider them a highly valued partner in supplying these engineering plastic materials to you, our valued client. For more information on the size range, availability and pricing on these and other plastic materials, click here or call us at 866-832-9315

Google+

Topic: Gehr Plastics – supplier of engineering plastic materials



Noryl versus PPO

What is the difference between Noryl and PPO (or Modified PPO)?Black Noryl PPO water nozzle

Noryl® is a trade name for Sabic Plastics (formerly GE Plastics) for their Modified PPO (Modified PolyPhenyleneOxide). Sabic is the world leader in engineering and mechanical plastic resins.

This resin is a remarkably versatile material. PPO exhibits unusually low moisture absorption and great machinability. Noryl® is an excellent choice for water filtration and fluid handling parts. Noryl has excellent impact resistance, long term dimensional stability and is light weight. Noryl® has exceptional electrical properties (properties boosted by lack of water absorption). It can be thermoformed and machined to tight tolerances. It carries a UL flammability rating between UL 94-HB to UL 94 V-1. The primary specification covering PPO (Noryl®) is ASTM-D-4349.

Sabic Noryl is available in two standard unfilled varieties, EN-185 and EN-265. The number indicates the heat deflection temperature of the material. This material is easy to machine, holds tolerances well, and is great for water immersion applications. A complete data sheet is found here.Noryl EN-265 machined part

We stock this material in both sheet and rod. The standard natural color for Noryl is opaque Black and is stocked as the EN-265 grade of resin. Noryl® is also available as a glass filled material which enhances both the mechanical and thermal properties of the resin. Chemical attack from water, most salt solutions, acids and bases is also minimal with Noryl®.

Materials with similar physical properties are ABS, Acetal – Delrin, PET and PBT (Polyester) and Nylon.

Contact us for more details on the range of PPO – Noryl materials. Call us at 866-832-9315 or email us.

Google+ – Hayden Hess

How to choose your PTFE Sheet Suppliers

Choosing a PTFE – TFE Sheet Supplier can be difficult, confusing and potentially costly. There are many industries and applications where PTFE – TFE Sheet materials are used, and many providers that want to fill this need. However, it can be difficult to find a supplier that meets all of your business’ PTFE – TFE Sheet needs. To help you choose the supplier that is right for your business, we have compiled this list of 7 things you must know when picking PTFE – TFE Sheet Suppliers.

1. PTFE – TFE is available in many shapes and sizesVirgin PTFE Gasket 7 Things You Must Know When Choosing Your PTFE Sheet Suppliers

Polytetraflouroethylene (PTFE) can be ordered in many different forms, including rods, sheets, blocks, strips, slabs and tubes. As your business grows, you may need access to one or more additional configurations – or perhaps your business is already using multiple configurations. Choose the proper PTFE Sheet Supplier that can meet not only your current needs, but future needs as well. You can view further information about the shapes and sizes as well as and resin properties on our PTFE – TFE information page here.

2. There are a variety of PTFE – TFE Sheet thicknesses to choose from

It is important to have access to multiple sheet thicknesses, and convenient and cost effective to access them all from one Sheet Supplier. That’s why Industrial Plastic Supply offers sheet thicknesses ranging from .005″ to 3.0″, and rod diameters from .125″ to 6.0″. Film is also available. As with in stock availability, your PTFE Sheet Supplier should also be able to meet all of your Sheet thickness needs. Standard sheet sizes are 48” X 48”, and films generally are stocked in 12” wide rolls.

3. Not all PTFE materials are created equal

Some PTFE – TFE Sheet Suppliers order materials from ‘who ever they can get it from’ on an as-needed basis. This brings the question of quality and consistency to mind. There are many manufacturers, including some from China and Russia with questionable quality ratings and machinability. Before committing to a quality PTFE Sheet Supplier, make sure that the supplier is using a reputable manufacturer, and that the quality of material meets your needs. Getting stuck with a poor quality, difficult or impossible to machine block of PTFE can be time consuming and costly.

4. Minimum material order amounts matter

Large Sheet Suppliers and other plastic suppliers often have high minimum order requirements. This makes sense for high volume applications, but for small businesses, or any business in the clutch, it may be necessary to request a smaller total order. Rather than work with multiple PTFE or Plastic Sheet Suppliers based on order size, choose a supplier that can service any order whether large or small. Industrial Plastic Supply has a low minimum material order of $20.

5. Many suppliers do not keep inventory in stockPTFE sheet and PTFE rods 7 Things You Must Know When Choosing Your PTFE Sheet Suppliers

Just like Grandpa used to say, “You can’t sell from an empty cart”.

Buying your materials from a plastic ‘broker’, means you may have to wait while they try to find the materials to fulfill your requirements. It may also mean that you get the quality of material that they can find quickly. While this may be acceptable for materials that are rarely ordered, your PTFE Sheet Supplier should have your business’ most commonly used materials on hand. This avoids delays and ensures the quickest possible turnaround times on your important orders, and materials from stock means a quality product for your parts.

6. Industry knowledge is critical

You want a Sheet Supplier that not only can deliver your materials, but answer any questions you may have, including the tough ones – whenever they arise. Finding a quality PTFE Sheet Supplier with expert knowledge and great availability will save your business headaches in the long run. Industrial Plastic Supply’s highly trained staff has an average of nineteen and a half years of experience in the plastic industry, and are only a phone call or e-mail away.

7. Choose a supplier with focus

A focus on industrial grade plastic supplies ensures that a supplier is specialized and knowledgeable enough to be your PTFE Sheet Supplier. By focusing on plastics, such a supplier will be dedicated to your mechanical plastic Sheets, Rods, Tube and other shape needs, no matter the application, and no matter how your business changes. Your important orders will be processed timely and efficiently. Since 1975, Industrial Plastic Supply has focused on the mechanical and machinable plastics market, and nothing else. For more information on PTFE Sheets or other plastic materials, contact Industrial Plastic Supply, 866-832-9315. We will work to earn your business. Also, compare PTFE with UHMW or read our post UHMW Sheet versus PTFE Sheets; or read our post How to use PTFE Rod for ideas.

Google+ – Hayden Hess

Topic: PTFE Sheet Suppliers


Acetal – Delrin Sheet vs. ABS Sheets and Rods

Acetal-Delrin® (Delrin® is a trade name for Dupont’s Acetal Homopolymer) and ABS (Acrylonitrile-Butadiene-Stryene) have some similar properties but are really very different materials. They similarities are: high impact strength, ease of machining with standard cutting tools and good mechanical properties. They are also both FDA compliant and are both good substitutes for brass. They also have great water absorption resistance and good electrical properties. Both materials are good for some of the same applications but certainly not all. Listed below are some of the major differences.Natural ABS Rod, Rods, Sheets and Sheet

ABS Sheet and Rod Information

 

  • ABS comes as Natural (straw) and Black color in Plate, Slab, Sheets and Rods, and thin sheet (.040″ – .250″) it is available as White or Black with a textured surface one side. It can be cut from 48″ X 96″ sheets into strip, panels or pieces.
  • ABS is formable. ABS is a great thermo-formable material while Acetal is not. Acetal is used more for machined parts such as gears and screws. ABS is great for molding and shaping parts from vacuum to heat forming. Excellent for model building and prototype projects.
  • ABS is easily bondable (similar to PVC). ABS can be bonded or welded to itself. Because Acetal is self lubricating, it is not possible for anything to stick to it unless etching is done – therefor it is not bondable.
  • ABS is a great material for painting and silk screening. While Acetal can not be painted or silk screened unless it has undergone Corona Treating (a flame surface treatment), but if treated will nice paint or screened surface.
  • ABS has better chemical resistance than Acetals or Delrin®. Both are attacked by acids like sulfuric, but ABS has a wider range of resistance to chemicals like aqueous acids, alkaline and alcohol. Acetal will degrade when exposed to such chemicals as chlorine and alkalines.
  • Specialty grades of ABS are available, including: Glass Filled, Static Dissapating, and Fire Retardant Grades (like Royalite – R59)Machined Black ABS Rod Part

ABS Typical Properties Table

General Property ASTM

TestTypical ValueR59 Typical ValueSpecific Gravity D7921.041.18 – 1.25Tensile Strength YieldD6386,5005,000Tensile ModulusD638320290,000Izod Impact – NotchedD2567.07.8Hardness – RockwellD785R105R93Deflection Temp @ 264psiD648192174Deflection Temp @ 66 psiD648208195Co. Thermal ExpansionD6965.3X10-54.6 -5.5X10-5

 

Acetal-Delrin® Sheet and Rod Information

  • Acetal is the better machining plastic, considered the best machining plastic material. Because of its durability and wear resistance, Acetal is an excellent choice for producing a wide variety of parts that require high wear resistance over a wide period of time. When machining to tight and specific tolerances, Acetal is ideal.
  • Acetal has low co-efficient of friction. Due to its self lubricating properties, it is a great material for sliding and wear applications. This material provides years of maintenance free bushings and bearings.Natural Acetal Machined Gears
  • Acetal – Delrin sheet is produced from .062″ – over 6″ thick and sheet sizes of up to 48″ X 120″ as standard. The standard color for Acetal and Delrin is Natural (a deep milky white) and Black. Some colors are available as Medical Grade, and can be obtained in limited sizes. These sheet are available cut to: slabs, blocks, plates, slabs and blocks.
  • Delrin – Acetal (Polyoxymethylene) can be both a homo and a co-polymer. The Dupont brand name is a homo-polymer which is a repeating chain of one atom while the generic Acetal is a co-polymer which is two atoms forming a repeating chain. ABS is only a co-polymer.

Acetal – Delrin Properties Table

General Property ASTM Test Typical Value Unfilled Delrin® Homo-Polymer Typical Value Unfilled Co-Polymer
Specific Gravity D792 1.42 1.40
Tensile Strength Yield D638 9,600 – 11,000 9,000 – 10,200
Tensile Modulus D638 450,000 400,000
Izod Impact – Notched D256 1.2 1.0
Hardness – Rockwell D785 M94 M90
Deflection Temp @ 264psi D648 257 220
Deflection Temp @ 66 psi D648 347 335
Water Absorption @ 24 hrs % 0.24 0.25
Co. Thermal Expansion D696 6.83X10-5 5.4X10-5

ABS and Acetal – Similar, but very different materials

Both of these materials possess excellent qualities and have a wide range of different uses. Acetal is great for machining, while ABS is great for forming and bonding. They both can be used for machined parts and are great choices for food contact and electrical applications. These two materials are both strong and durable plastics, but one might be better than the other for a specific job. When picking the right plastic, it is important to compare plastics and their specific properties to make sure the material won’t fail and that your job will be successful.

Contact us for additional information, call us at 866-832-9315 or contact us here. Consider Industrial Plastic Supply for all your plastic needs, we want to be your go-to plastic supplier.

Google+ – Hayden Hess

How to use Virgin PTFE Rod

PTFE Rod is a remarkable product. PTFE – Polytetrafluoroethylene was discovered on April 6, 1938 by Dr. Roy Plunkett at the DuPont research laboratories. And this original PTFE was further developed by Dupont, and was released as a product in 1945.

This product is extremely chemical resistant, and can handle temperatures above 500 degrees. One of the first household uses for PTFE is the ‘PTFE Coated Frying Pan’. While this pan works very well, it is a different process than the PTFE Rod and Sheet we supply. It is a sprayed on coating that is almost black in color, where the pure PTFE Rod and Sheet is bright white in PTFE Round Rod Steam Valve Packingcolor.

What are some of the uses for PTFE TFE Rod?

Because PTFE exhibits high temperature and chemical resistance, it is commonly used in valve applications. From simple steam / hot water valves to high heat, caustic chemical valves in the fluid handling industries. This material is a semi-rigid to rigid plastic, and can be machined very easily – one of the easiest plastics to work with. The PTFE rod can be machined to very close tolerance, and in most small diameter rod it is supplied with a +.002″/-.00″ on the diameter (check for tolerance on your requested size). The chemical resistance is one of the key properties associated with the material. In sheet or thin sheet (film) PTFE is used as gasket material for similar high heat and chemical resistant flange and seals.

PTFE RodPTFE sheet and film - used as gasket material

Since 1945 Dupont has been the world leader in producing PTFE resins. Over the last couple of years, with the global shortage of Fluorspar (a key ingredient in producing all Fluoropolymer Plastics) Dupont has made some changes to their product offerings. Included in this change is a discontinuation of the production of one of most common granular molding powder (resin) used in the production of PTFE Rod and Sheet. This has the industry in a panic, the remaining global suppliers of PTFE resin are scrabbling to fill the void left by this decision. What does this mean to you? If you are used to purchasing PTFE rod or sheet, you may find the base materials may not be from Dupont. Our suppliers have small amounts of the Dupont resin, but mostly are replacing their raw materials with molding powder from other manufacturers. It may be, in the very near future, that all PTFE rod and PTFE sheet may not be made from Dupont brand resin.

Click here for current pricing on PTFE Rod.

UHMW rod is also a very slippery plastic material, but it does not take the high heat the PTFE rod does.

If you are one of the many clients that need this material, please contact us for clarification, information, supply chain news and possible changes in sources of supply. Call us at 866-832-9315 or email us here.

Thank you,

Industrial Plastic Supply

Before You Choose, read 7 Things You Must Know When Choosing Your PTFE Sheet Suppliers.

Google+ – Hayden Hess